- Beschreibung
- Spezifikation
- Dimensions
- Anfrage senden
Series: FD - planetary crane winches
Designed to be used where there is little space. They are compact and lightweight lifting winches which are suited to be installed on cranes, davits and derricks. Their single drum support enables a rope to leave a drum at any angle. Large drum diameters ensure a healthy drum / cable diameter ratio and sufficient working lengths despite short drums. Their heavy duty planetary drive is partly located within and protected by their drum core.
Standard features
- Steel drum with cable fixing point at flange - Single drum support
- Heavy duty planetary gearbox
- FD GP gear type air motor complete with hand control valve and mufflers
- FD E; IP 54 400 V AC / 3-phases / 50 Hz braked motor
- FD H; orbit or radial piston type hydraulic motor complete with brake valve
- FD LV; vane type air motor complete with hand control valve and mufflers
- FEM / ISO class: T4-L3-M5
- Double layer 2-component conservation according ISO 12944 category C2-Low, colour RAL 5010
General options for winches
- Flanschteiler des Trommels
- Trommel
- Schutzabdeckung
- Anpresswalzen
- Spindel Endschalter
- Encoder + Spindelendschalter
- Handkupplung
- Scheibenkupplung
- Schalter des losen Seils
- Pneumatischer Endschalter
- Manuelle Bandbremse
- Hydraulische Bandbremse
- Steuerungskaste
- Pneumatischer Steuerungsventil
- Seilverleger
- Zusätzliche Seilenverankerung
- Schleifring
- Emergency, Handantriebkürbel (an dem Elektromotor)
WLL 1st layer [kg]: | 1500 kg |
WLL lifting top layer: | 1200 kg |
Speed [m/min]: | 8.0 m/min |
Speed at top layer: | 12.0 m/min |
Number of layers: | 4 |
Drum capacity first layer: | 10 m |
Drum capacity top layer: | 53 m |
Pressure drop: | 7.0 bar |
Flow: | 65 l/min |
Mass: | 140 kg |
Rope diameter: | 11 mm |
*For more storage, higher / lower speed or change any parameter, please contact with us
Dimension D1: | 244 mm |
Dimension D2: | 380 mm |
Dimension L1: | 176.0 mm |
Dimension L2: | 310.0 mm |
Dimension L3: | 96 mm |
Dimension L4: | 785 mm |
Dimension L5: | 240 mm |
Dimension L6: | 44 mm |
Dimension H1: | 215.0 mm |
Dimension H2: | 405 mm |
Dimension W1: | 440.0 mm |
Dimension W2: | 400 mm |
Hole diameter: | 18.0 mm |