- Beschreibung
- Spezifikation
- Anfrage senden
Series: SRM - mooring winches
This standard set of the SRM type mooring and anchoring winches is designed to be used on jack-up rigs, barges and other marine units. They can be fitted with several options such as free spooling clutches and spooling gears. Also a range of mooring accessories can be offered such as fairleads, sheaves, wire rope and load measuring equipment.
Standard features
- Heavy duty slew ring
- Heavy duty planetary gearboxes fitted with pinions - SRM E
- Two drum supports
- Lifting lugs
- IP 56 TENV seawater-resistant 400-440 V AC / 3-phases / 50 - 60 Hz braked motors
- SRM H; radial piston type hydraulic motors complete with brake valve
- Steel drum with cable fixing point at flange - Band brake (manual)
- FEM / ISO class: T3-L3-M4
- Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 1023
Available mooring equipment
- Deck bollards and chocks
- Horizontal deck sheaves without or with load pins
- Deck bollards and chocks
- Swivel fairleads
- 4, 6, 7 or 10 roller fairleads
General options for winches
- Flanschteiler des Trommels
- Trommel
- Schutzabdeckung
- Anpresswalzen
- Spindel Endschalter
- Encoder + Spindelendschalter
- Handkupplung
- Scheibenkupplung
- Schalter des losen Seils
- Pneumatischer Endschalter
- Manuelle Bandbremse
- Hydraulische Bandbremse
- Steuerungskaste
- Pneumatischer Steuerungsventil
- Seilverleger
- Zusätzliche Seilenverankerung
- Schleifring
- Emergency, Handantriebkürbel (an dem Elektromotor)
WLL 1st layer [kg]: | 18000 kg |
WLL lifting top layer: | 11265 kg |
Speed [m/min]: | 8.0 m/min |
Speed at top layer: | 13.0 m/min |
Number of layers: | 7 |
Drum capacity top layer: | 430 m |
Rope diameter: | 32 mm |
Flow: | 120 l/min |
Pressure drop: | 220.0 bar |
Bandbrake force at first layer: | 45000 kg |
*For more storage, higher / lower speed or change any parameter, please contact with us