- Beschreibung
- Spezifikation
- Dimensions
- Anfrage senden
Series: AW/PW - accomodation and pilot ladder winches
AW winches are designed to position and hold accommodation and ship-to-shore ladders and ladders between vessels and offshore installations. Constructed in accordance with SOLAS requirements for international shipping, the range features a dynamically and statically self-braking wormgear and emergency hand crank. Each type may be configured for single or twin rope operation and powered by means of an electric or pneumatic motor. PW winches are used to lower and lift the pilot ladder on board of seagoing vessels, EMCE has one standard design, PW 550, that has been supplied to several dredging vessel fl eet owners. We have also supplied custom-built designs. Please ask about the available options.
Standard features
- Self-braking wormgear transmission for the AW series
- Planetary gear for PW 550
- SOLAS compliance
- IP 56 TENV motor protection for the AW ES series
- IP 66 TENV with standstill heating for the PW 550
- Rotary vane, gear type air or motor for the AW LS series
- Steel drum (not grooved) with one or two cable fixing point(s) at flange
- Two drum supports
- Emergency hand crank for the AW series only
- Double layer 2-component conservation, colour RAL 5010
- 13 meter pilot ladder with 32 fl at steps, 4 spreaders and 4 rubber steps for PW 550
- Pneumatic versions with hand control valve
- IP 66 spindle limit switch for PW 550
- FEM / ISO class: T3-L3-M4
Note: For pneumatic winches is the speed on the first layer the average speed. The speed at the top layer is at unloaded conditions.
General options for winches
- Flanschteiler des Trommels
- Trommel
- Schutzabdeckung
- Anpresswalzen
- Spindel Endschalter
- Encoder + Spindelendschalter
- Handkupplung
- Scheibenkupplung
- Schalter des losen Seils
- Pneumatischer Endschalter
- Manuelle Bandbremse
- Hydraulische Bandbremse
- Steuerungskaste
- Pneumatischer Steuerungsventil
- Seilverleger
- Zusätzliche Seilenverankerung
- Schleifring
- Emergency, Handantriebkürbel (an dem Elektromotor)
WLL lifting top layer: | 1500 kg |
Speed [m/min]: | 7.5 m/min |
Number of layers: | 3 |
Drum capacity top layer: | 50 m |
Pressure drop: | 6.0 bar |
Flow: | 130 l/min |
Mass: | 275 kg |
Rope diameter: | 12 mm |
Holding force: | 4000 kg |
*For more storage, higher / lower speed or change any parameter, please contact with us
Dimension D1: | 195 mm |
Dimension D2: | 370 mm |
Dimension L1: | 300.0 mm |
Dimension L2: | 180.0 mm |
Dimension L3: | 850 mm |
Dimension L4: | 318 mm |
Dimension L5: | 565 mm |
Dimension L6: | 235 mm |
Dimension L7: | 25 mm |
Dimension H1: | 15.0 mm |
Dimension H2: | 254 mm |
Dimension H3: | 182 mm |
Dimension H4: | 570.5 mm |
Dimension W1: | 546.0 mm |
Dimension W2: | 207 mm |
Dimension W3: | 440 mm |
Dimension W4: | 380 mm |
Hole diameter: | 20.0 mm |